Specifications:
Product Type:4.3inch Portable Monitor
Screen Size: 4.3inch
Resolution: 800×480
Panel Type: IPS
Visual Angle: 160° Full View Angle
Color Gamut: 50% NTSC
Refresh Rate: 60Hz
Touch Function: Yes
Touchscreen Type: Capacitive
Size Ratio: 16:9
Contrast Ratio: 800:1
Brightness: 300cd/m²
Speakers: Yes
Audio Jack: Yes
Weight: 89g
This portable touch monitor supports Windows/mac OS/Raspbian/Ubuntu/Kali/Retropie. Only single-point touch is supported in most of systems, multiple touches may be supported in some software, max 5-points.
Connect to PC
The display supports Windows 7/8/10/11 when working with Windows PC, supports 5-points and it is driver free.
- Connecting the USB-5V interface of display to USB port of PC by micro USB cable.
- Connecting the interface of display to HDMI port of PC by standard HDMI cable.
- Wait for displaying.
Connect to Raspberry Pi
- Insert the TF card to Raspberry Pi.
- Connecting USB-5V interface of the monitor to a USB port of Raspberry Pi.
- Connecting HDMI interface of the monitor to HDMI port of Raspberry Pi.
- Power on Raspberry Pi and the LCD will display.
Raspberry Pi doesn't support hot-plug and auto-recognized the resolution, you need to configure the resolution manually, otherwise, the display cannot work normally.
How to configure Raspberry Pi Resolution?
<Step 1>. Install the official Raspbian image
1) Download the latest image from the Raspberry Pi official.
2) Follow the steps of the official tutorial to install the system.
<Step 2>, modify "config.txt"
After completing the programming of step 1, open the config.txt file in the root directory of the Micro SD card and add the following code at the end of the file:
max_usb_current = 1
hdmi_force_hotplug = 1
config_hdmi_boost = 7
hdmi_group = 2
hdmi_mode = 87
hdmi_drive = 2
hdmi_cvt 1024 600 60 6 0 0 0
<Step 3>. Insert the micro SD card into the Raspberry Pi, connect the Raspberry Pi and monitor through the HDMI cable and USB cable; then supply power to the Raspberry Pi; if the display is normal, the driver has been successfully installed (please use a full 2A power supply).
About touch function:
The touch is driver-free. After the monitor is connected to the host through a USB cable, the driver will be automatically installed.
Regarding the touch function, please note the following:
<1>. The "USB-5V" interface of the monitor must be directly connected to the host computer, please do not use an external power supply. ( * The power supply needs to be more than 5V/2A, if not, otherwise the screen may flicker due to insufficient power supply.）
<2>. After completing the above operations, please restart the host (Raspberry pi / PC).
<3>. We recommend using the original cables. ( In order to ensure that the cables used has the function of transmitting the signal.）
What's in the box?
1x Portable Monitor
1×microUSB
1x HDMI Cable
1x Stand